Configuring your outgoing e-mail settings

So you can send outgoing e-mails through NABD to your customers, you must configure your outgoing e-mail settings.

You'll need the following information:

Tip: If you don't know the server address and port, check the support section of your e-mail provider's website.

To configure your outgoing e-mail settings:

  1. From your left main menu, select Admin.

  2. From Admin page ,within  Configuration section.

    Then select Global settings.

  3. Locate the e-mail settings box on the lower right side of the Global settings page.

  4. Type the SMTP server address and SMTP server port for your e-mail provider.

  5. Type your support e-mail address User ID and Password.

  6. Type the e-mail address you want to use as your main support e-mail address. This will be your contact e-mail for all support issues via NABD.

  7. When you're done, click Save.

    Your new outgoing e-mail settings will automatically be applied. Make sure you send a test outgoing e-mail to make sure your settings are correct.